The most common electrical faults.

The most common electrical faults.

It is common for electrical breakdowns to occur in our homes, some of which are easy to solve while others require a qualified electrician.

That is why we will explain what types of breakdowns occur more frequently and how to solve them.

Types of electrical faults.

Power surge.

It is one of the most common, in the case of a power interruption. Our supply point has contracted a certain electrical power, depending on the needs and type of address.

However, if we exceed that electrical load by plugging in more electrical equipment than it can support or appliances with a higher power, the fuses will be activated, as a result the power supply will be interrupted.

How to solve it.

Its solution is simple, since it will simply be necessary that you deactivate some of the appliances of greater consumption, lower the leads and wait a few seconds. Finally, reconnect them from right to left and the last one being the general switch.

If it is still not possible to recover the power supply, contact a qualified electrician.

However, if the ICP often jumps, we must contact the Distributor to increase the contracted power. If you are with Lumisa and want to modify your Contracted Power, you only have to contact us through the number 900 811 473 or through the power change form.

Short circuit.

It is caused by the deterioration of the electrical wiring or the overheating when we use several electrical devices in a multiple socket that causes the short circuit to occur.

It is a strong and unexpected increase in the intensity of the current, causing fires or affecting the electrical installation.

How to solve it.

To solve it, and depending on the intensity, we recommend that you go to a qualified electrician.

Loss of isolation.

It is the deterioration of the current insulating materials of an electrical installation. Because of this, the energy leaves its normal circuit, causing short circuits in the system and increasing the possibility of someone being electrocuted.

It is caused by the aging of the electrical installation and lack of maintenance, due to the extreme temperatures, chemical or corrosive products to which it is exposed. It occurs in appliances with greater antiquity.

How to solve it.

It is important that if you detect a lack of electrical insulation contact a professional in order to check the electrical installation as it requires more technical knowledge for its repair.

If it is a serious incident, you should contact the Distributor in your area.

REE CODIGO NOMBRE DISTRIBUIDORA CUPS TELEFONO AVERIA
0021 IBERDROLA DISTRIBUCION ES0021-0P 900 171 171
0022 UNION FENOSA DISTRIBUCION ES0022-1P 900 333 999
0023 CIA SEVILLANA ELECTRICIDAD SA ES003110-0F 900 850 840
0024 FECSA (ENDESA) (800 500 500) ES003140-0F 800 760 706
  RECLAMACIÓN AVERÍAS   902 509 600
0026 HC ENERGIA ES0026-0F 900 907 001
0029 ELECT REUNIDAS ZARAGOZA SAU ES0029-0F 900 848 900
0113 ESTABANELL ENERGIA ES0113-0F 900 154 444
0189 ELECTRA DEL MAESTRAZGO ES0189-0F 964 173 275
0034 ELÉCTRICA DE CÁDIZ ES003411-0F 900 373 411
 
Eventual Light High.
Previous

Eventual Light High.

How to calculate the electrical power you need in your home.
Next

How to calculate the electrical power you need in your home.

Call 900 811 473 or we will call you whenever you want